Economical SMD 20W LED High Bay Light
- Size:see details
- Lumen:2000-2300 LM
- Warranty:2 Years Warranty
- Standard:CE RoHS
Economical SMD 20W LED High Bay Light
Economical SMD LED High Bay Light
(1): Economical Money Saving Type
(3): LEDs Type:SMD2835
(4): Input Voltage:175-265V AC
(6):Color Temperature:Warm White:3000K / Nature White:4000K /Pure White:6000K
(7): Light Effect:100-110LM/W
(9):Beam Angle: 90 °/ /120°
(10): Suitable for installation height: 2.7m
(13):Warranty: 2 Years
Product Brief Introduction:
1): LED High-bay light use ultra bright SMD LED as light source, unique cooling aluminum shell structure, elegant, easy to install.
2): Start fast, low power, no flash, not easy to produce visual fatigue, not only super energy efficient, more environmentally friendly, is one of the state's key product
development of green energy-efficient lighting project is an excellent choice for factories, warehouses, supermarkets and other public places lighting.
1): Ultra-bright SMD LED, high brightness, large viewing angle, light uniformity.
2): High efficiency, high power factor constant current drive power.
3): The unique structure of die-cast aluminum heat sink, nice and strong cooling Capacity.
4): Start quickly, power that reaches the normal brightness, without waiting, to better meet the lighting needs.
5): Life up to 20,000 hours, several times in the ordinary energy-saving lamps,to ensure long-term use without replacement.
6):LED High-bay lamp illumination intensity, spectral pure, high CRI, no UV,infrared light and other radiation.
7): Under the same conditions of illumination energy saving effect is quite obvious,saving up to 60%.
8):The real green products, mercury, lead and hazardous environmental substances.
Factories, shopping malls, schools, warehouses, hotels, office buildings, exhibition halls, parking lots and other lighting places.
1：Needs to be installed in the position of High-bay lamps, pre-installed hook (hook rings supporting the use of energy and the other when the hook is installed to ensure the
carrying capacity of more than 25Kg).
2：The rings on the card before the installation of the lamp within a good hook, thereby lifting up through the rings of the fixture.
3：Connect the power cord from the scene attracted to the lamp power line, according to "Brown ---- L" "Blue ---- N" "yellow line to ground," the principle of connection, and
while making a waterproof and insulated.
4：Power up,confirm High-bay lamp can work.
5：Installation diagram is as follows:
1.Please confirm whether the voltage before electrical connection within the parameters of non-standard value voltage may damage the lamps.
2.The initial budget required number of light sources, a single light source is then calculated based on the total rated power consumption, and thus make the power
3.For your safety, do not touch the metal part of the post-powered lamps at the bottom of any part of the body.
4.Before unpacking, please confirm that there is no damage to the lamp during transport, if so, please immediately notify your supplier for a replacement.
5.Ensure that the installation location before installation can withstand 10 times the weight of the product; installed in no vibration, no swing, no fire hazard areas.
6.When the lights work, light body shell temperature up to 50 ℃, should allow the lamp away from the temperature-sensitive devices.
7.Lighting semiconductor lighting products, particularly sensitive to the ambient temperature, ambient temperature is above 55 ℃ will shorten its life, it should allow the lamp
away from the heat source to maintain ventilation work environment; and lighting work environment temperature is kept at 0 ℃ ~ 25 ℃, its light source life can be effectively
8.Do not short pass frequently when using power, otherwise the lamp easily burned.
9.In order to ensure good condition and safe to use the product, please follow the instructions on the instructions and reminders.
TAG:   Economical SMD2835 20W LED High Bay Light